How to Make Leather Cord Bracelets with Charms

Single Cord DIY Leather Cord Charm Bracelet

To create this charming leather cord bracelet, you will need the following materials:

• Leather cord, approximately 0.5 to 1 mm in width and 25-30 cm in length, depending on your wrist size
• 2 metal cord crimps of the appropriate size for your leather cord
• A clasp
• 10-20 metal/bone/wooden beads that can accommodate your cord.
• Several jump rings slightly larger than the cord
• One larger jump ring
• Various charms of your choice
• Pliers
• Scissors

Here are the steps to make this leather cord charm bracelet:

1. Use your pliers to secure one end of the leather cord inside one of the crimps. If necessary, you can fold the end of the cord to make it thicker before inserting it into the crimp.
   
   
2. Cut the other end of the leather cord at an angle. This will make it easier to thread through the beads.
   
   
3. Begin threading the cord through the beads and jump rings, arranging them in any order you prefer, allowing your creativity to guide you.
   
   
4. Attach the charms to the jump rings on the bracelet, adding a personal touch to your leather cord charm bracelet.
   
   
5. Ensure that the leather cord bracelet is the correct size for your wrist.
   
   
6. Use your pliers to secure the other end of the leather cord inside the remaining crimp.
   
   
7. Attach the clasp to one end of the bracelet and the larger jump ring to the other end. Congratulations! You have successfully made a leather cord bracelet with charms.

Now that you have learned how to create this particular leather cord bracelet, let's explore more step-by-step instructions on crafting other leather cord bracelets.

You might also be interested in diy boots decorations.

Source: http://www.crafthubs.com

How to Make a Double Leather Cord Charm Bracelet

To create this charming leather cord bracelet, you will need the following materials:

• 2 leather cords, 0.5 to 0.7 mm in width and 25-30 cm in length (adjust length based on wrist size)
• 2 crimps suitable for securing 2 leather cords
• A clasp
• 10-20 metal/bone/wooden beads that can accommodate both cords
• Several jump rings slightly wider than each cord
• One larger jump ring
• Various charms of your choice
• Pliers
• Scissors

Instructions:

1. Begin by placing the two leather cords side by side. Use pliers to secure one end of the cords inside one of the crimps. If the cords are difficult to secure, you can fold the ends to make them easier to handle.
   
   
2. Cut the opposite ends of the cords at an angle to create a neat finish.
   
   
3. Now, thread each cord through different beads and jump rings. You have two options: either thread the cords together for a double cord effect, or insert the beads and rings onto each individual cord to create a bracelet with separated cords.
   
   
4. Attach your chosen charms to the jump rings.
   
   
5. Ensure that the leather cords are the appropriate size for your wrist. Adjust the length if necessary.
   
   
6. Use pliers to secure the remaining ends of the cords inside the other crimp.
   
   
7. Attach a clasp to one end and the larger jump ring to the other end to complete your double cord bracelet DIY project.

Remember, this step-by-step tutorial can be adapted to create bracelets with more cords, such as a triple leather cord bracelet. Simply adjust the sizes of crimps and beads accordingly.

Source: http://timoaccessories.blogspot.de/

DIY leather cord charm bracelet with coins

Materials needed:

Leather cord, 0.5 to 1 mm in width and 25-30 cm in length (adjust length based on wrist size)

2 metal cord crimps, suitable for the leather cord

A clasp

5-10 metal jump rings slightly larger than the cord

One larger jump ring

5-10 small coins or discs

Pliers

Scissors

Small pilot point drill

Instructions:

1. Start by gathering all the necessary materials for your leather cord charm bracelet with coins.
   
   
2. Follow the same basic steps as the first tutorial on making leather cord bracelets, with a few modifications.
   
   
3. Instead of using beads, you will be using jump rings. Insert the leather cord into the small jump rings.
   
   
4. Use a small pilot point drill to create a hole in the upper part of each coin or disc.
   
   
5. Decide on the order in which you want to arrange the coins.
   
   
6. Thread the coins onto the bracelet by attaching them to the jump rings.
   
   
7. Continue adding coins until you have achieved the desired design.
   
   
8. Once all the coins are in place, secure the ends of the leather cord using the cord crimps.
   
   
9. Attach a clasp to one end of the bracelet and the larger jump ring to the other end.

Congratulations! You have successfully created a beautiful DIY leather cord charm bracelet with coins.

In the next section, we will provide you with more ideas on how to make leather cord bracelets with various types of charms.

Source: https://eurekacrystalbeads.wordpress.com

Additional Ideas

If you want to add some variaton to the leather cord charm bracelets we previously discussed, here are a few ideas to consider:

• Oval magnet clasps: for a different closure option, try using oval magnet clasps. With this type of clasp, you can eliminate the need for jump rings or crimps, making it even easier to create leather cord bracelets with charms.
  
  
• Knot accents: give your layered leather cord bracelet with charms a unique twist by adding knots. Knotting the leather cords in the center or incorporating multiple knots can add visual interest. There are various types of knots you can experiment with, such as square knots, which can give your DIY leather cord charm bracelet a professional look.
  
  
• Suede cords: instead of using traditional leather cords, try using suede cords. They offer a soft and textured appearance, adding a different aesthetic to your bracelet designs.
  
  
• Metallic accents: create a layered leather cord bracelet with charms using metallic-colored leather cords in different shades, combined with metallic Tibetan beads. This combination adds a touch of shine and sophistication to your bracelet.

These leather cord bracelet ideas provide opportunities for customization and allow you to experiment with different materials and designs.

Source: http://www.crafthubs.com

How to Make Adjustable Leather Cord Bracelets

If you want to create leather cord bracelets with adjustable sizes, there are two methods you can use. Follow these step-by-step instructions to make adjustable leather cord bracelets:

Method 1: Sliding Knot

1. Start by inserting all your desired charms and beads onto the leather cord.
   
   
2. Take the left end of the cord and wrap it around the right end, creating a loop.
   
   
3. Wrap the left end around the loop once more, forming two loops in total.
   
   
4. Pass the left end of the cord above and around the loops, then thread it through the loops, creating a knot-like structure.
   
   
5. Pull both ends of the cord to tighten the knot.
   
   
6. Repeat the same process with the right end of the cord.
   
   
7. To secure the adjustable leather cord bracelet, tie a knot at each end of the cord.

Method 2: With Beads

1. Begin by inserting all your chosen charms and beads onto the leather cord.
   
   
2. Select a tight bead that can accommodate the leather cord twice, fitting snugly.
   
   
3. Thread one end of the cord through the tight bead.
   
   
4. Thread the other end of the cord through the tight bead in the opposite direction.
   
   
5. The tight bead will act as an adjustable mechanism, allowing you to slide the cord to adjust the bracelet's size.
   
   
6. Tie knots at each end of the cord to secure the adjustable leather cord bracelet.

That's it! You have learned two different methods for creating adjustable leather cord bracelets with charms. Now you can enjoy making unique and customizable bracelets to suit any wrist size.

If you want to read similar articles to How to Make Leather Cord Bracelets with Charms, we recommend you visit our Art & handicraft category.